2080 Series - High Gloss Blue Raspberry

3M™ Wrap Film 2080-HG378 HG Blue Raspberry

  • All of the same features as 3M Series 1080, plus: Protective film layer on gloss colors - stays on during installation and then is removed quickly, easily and cleanly after install to reduce surface impressions and scratches.
  • Improved conformability - provides a better fit around curves and in channels for a sleek appearance and easier installation.
  • Improved warranty allowing up to 7 years of protection on vertical applications and 2 years on horizontal.
  • 3.5 Mil Cast Wrap Film with Long-term, Gray, Removable, Repositionable, Pressure Activated Adhesive with Non-visible Air Release Channels
  • New protective film layer on Gloss colors stays on during installation and removes quickly, easily and cleanly after install
  • New unique, conformable film layers provide a better fit around curves and in channels for sleek appearance and easier install
  • Colors: 8 year expected outdoor performance, 7 year vertical and 2 year horizontal warranty period
  • Gloss colors can sometimes have a haze/blotchiness/mottling that can usually be eliminated with heat. Even the shipping box can create surface impressions that can also be eliminated with heat.
  • Patterns/textures/metallics: 5 year expected outdoor performance, 3 year vertical and 1 year horizontal warranty period
  • The opacity of these films vary and should be considered when installing
  • Available in 60" width, allowing most vehicles to be wrapped without seams
  • Invisible air release channels assure fast and easy virtually bubble-free applications
  • No overlaminate required, however, overlaminates have been shown to improve the cleanability of matte colors and, increase the fade resistance of neon colors
  • Watercraft graphics applied above static water line only
  • Caution: Always pre-test vinyl installation on vehicles. Do not install if there is any adverse or negative impact on sensors and/or other safety-related equipment on the intended vehicle.
  • Warning: During installation it is critical to prevent “dragging” the adhesive side of wrap vinyls over edges and flat surfaces. Abrasion caused by dragging can result in “adhesive dots” or “sanding” under the surface of the vinyl and make it appear to have many small bumps. This is usually not repairable. For more information and installation advice, please view the video below titled “Avoid Dots/Adhesive lines”.
  • Film colors can vary slightly from roll to roll. For the most consistency, please purchase a full roll. We are unable to guarantee consistency with multiple orders of cut yardage.
  • New Imporved 3M warranty is for product value only and provides no protection or reimbursement for additional costs including labor or vehicle/paint damage. Please refer to the Information Sheets below.
  • Do not install the 3M 2080 over rubber caulking or silicone seals as it will not adhere properly. Trim the film just over the lip of the metal body panel edge so that the adhesive does not touch the caulking.

  • Sale
  • Regular price $1,012.27
Shipping calculated at checkout.

People who bought this product, also bought

(function () { var links = document.links; for (let i = 0, linksLength = links.length ; i < linksLength ; i++) { if (links[i].hostname !== window.location.hostname) { links[i].target = '_blank'; links[i].rel = 'noreferrer noopener'; } } })();